
Evenflo Gold Revolve360
Face Rear & Front
- Weight Limit (lb): 4-40 (RF); 22-65 (FF); 40-100 (Booster)
- Height Limit: 40" (RF); 49"(FF); 57” (Booster)
- Age Limit: Birth-8 Years or Older
I’ve reviewed several swivel car seats,s and I have to say that the Evenflo Revolve 360 is up there with the best. For an all-in-one car seat, there’s nothing on the market that can compete with the Gold Revolve360. Everything from the 360-degree rotation to the high weight and height limits and everything in between is expertly designed with safety, comfort, and functionality in mind. The rear-facing harness up to 40 pounds, forward-facing harness up to 65 pounds, and booster up to 120 pounds make the Evenflo Gold Revolve 360 last good years while the energy-absorbing foam, two layers of side impact protection, and foolproof installation deliver safe rides all the time. Where the Evenflo Revolve 360 struggles, though, is in its price. With an MSRP of around $400, the Revolve 360 is more expensive than most all-in-one car seats on the market. However, it’s the most affordable rotating car seat ever.
*Price may change due to e-commerce platform and brand sales promotion.
Evenflo Revolve 360 Review - Best Budget Rotating Car Seat
1. Who Is It Best For?
Will the Evenflo Revolve 360 3 in 1 Car Seat Be a Good Fit For Your Child and Family?
There is one type of parent that will love Evenflo Revolve 360, and that’s anyone looking for a rotating car seat for easy access to their child.
The 360-degree rotation is absolutely the best selling point for this car seat. You don’t need to climb in the back row to get your kid in and out of the car seat with the rotating feature. Also, you just need to install it once (only the base), then rotate the carrier for different stages and modes.
It’s a versatile car seat that can grow with their child. It is suitable for infants and toddlers and big kids thanks to its weight range from 4 to 120 pounds as long as they’re within the 57-inch height limit.
In general, the Evenflo Revolve 360 is a great option for parents who want a car seat that provides maximum comfort, safety, and convenience. Whether you’re driving a short distance or taking a long road trip, this car seat is designed to keep your child safe and secure while providing the flexibility you need to get around.
2. Pros and Cons
Pros
- Most affordable price
- 360-degree rotational
- Up to 120 lb weight limit for big kids
- US car seat
Cons
- A bit bulky
3. Value for Money
Is the price tag worth it?
Is the Evenflo Revolve 360 3 in 1 car seat good for value?
For other rotating car seats, I would say that whether you think the car seat is worth its price tag will depend on what you’re looking for from a car seat. But for this one, I would say that
‘The Evenflo Revolve 360 is definitely worthy of its price tag.’
It’s the best option balancing safety, comfort, ease to use, convenience, and price.
If you want a car seat that is well-built and last good years, meaning it has a higher size limit and is safe and comfortable to ride your kid every time on the road, then the Evenflo Revolve 360 is a good option and worth the $399.99 price tag, especially adding the 360 degrees rotation.
It maintains Evenflo’s stellar reputation and its combination of safety features and ease of use is what makes it attractive to so many parents. Both of these factors play a big role in its price tag.
We have over 50+ car seats in our database and not a single one rivals the Evenflo Revolve for its practicality and price – it’s the cheapest rotating car seat that lasts three car seat stages from rear-facing harness, forward-facing harness, and booster. By comparison, its closest rivals – the Graco Turn2Me and Maxi-Cosi EMME – both priced $50 more.
While it may not have as many bells and whistles as some of the more expensive car seats on the market, it provides a solid set of features that are designed to keep your child safe and comfortable while you’re on the road.
However, it needs to be noted that the Evenflo Revolve 360 is heavier and bulkier when compared to toddler car seats performing the same stages. So, if you’re looking for a lightweight convertible car seat, or you plan to take a car seat that is portable or foldable for easy carrying and storage, its flaws will unveil and you may not be able to justify its high price tag.
4. Alternatives
What other swivel car seats should you consider?

Graco Turn2Me
- Weight range (lb): 4-40 (RF): 22-65 (FF); 40-100 (Booster)
- Height limits: 17-40"(RF); 28-49"(FF); 44-57"(Booster)
- Stage: 1st, 2nd, 3rd
- Lifespan: 10 years
- Suitable: Birth to 8-10 years old
- Rotating: 360 degrees
- Base: Built-in base
Why is it better than Evenflo Revolve 360?
- Better brand reputation
- Can be used on a plane
Why is it worse than Evenflo Revolve 360?
- Slightly more expensive ($449.99 vs $399.99)
- Fewer rotation degrees (180-degree vs 360-degree)
- Lower booster weight (100 lbs vs 120 lbs)

Nuna Revv
- Weight range (lb): 4-40 (RF): 25-40 (FF)
- Height limits: 43"(RF & FF)
- Stage: 1st, 2nd
- Lifespan: 10 years
- Suitable: Birth to 3-4 years old
- Rotating: 360 degrees
- Base: Built-in Base
Why is it better than Evenflo Revolve 360?
- Narrower width to fit in more vehicles (18.5” vs 19.8”)
- More recline choices (10 positions vs 4 positions)
- Integrated rebound-bar
- Fire retardant-free materials
Why is it worse than Evenflo Revolve 360?
- Much more expensive ($650 vs $399.99)
- Lower height and weight limits (40 lbs/ 43” vs 120 lbs/ 57”)
- Lack booster mode
- Need more space in rear-facing mode after reclining
5. Design
Dimensions and Width
Like all 3 in 1 car seats, the Evenflo Revolve 360 is bulky and takes much space for placement. This can be known from its design as well as the dimensions:
Width: 19.8 inches
Depth: 21 inches
Height: 25.9 inches
The Evenflo Revolve 360 is a not compact car seat, especially considering its 360-degree rotation feature. It probably needs more space than traditional car seats as they’re fixed after installation and during use. But if you want to get the kid in and out of the car seat, you need to rotate it to face the door and then face the rear or front. So it needs a bit of space from the next seat.
While the car seat is not the slimmest on the market, it is designed to fit in most vehicles and can be used in small cars. The 19.8-inch width is relatively narrow if compared to the best narrow car seats we reviewed. (20-inch is the basic threshold but I think I need to update it in the future.)
However, whether it will fit three across in the backseat of your vehicle will depend on the size and shape of your vehicle’s back seat and if there are any other car seats that you are using next to it.
It is always recommended to measure the width of your vehicle’s back seat and the car seats that you plan to use to ensure that they will fit properly. See also our post on the best 3 across car seats if you have to install multiple car seats in a row.
Portability
The Evenflo Revolve 360 car seat weighs approximately 29.6 pounds, which is a little heavier than the majority of car seats on the market, making it difficult for parents, especially short moms, to move it from one vehicle to another. Along with its bulky design, it’s not a portable car seat. See our recommendations for the best portable car seats if you need one.
The better part of this rotating car seat is that it consists of two parts – a carrier and a base. That means, if you really want to switch between cars, you can effortlessly achieve this.
Also, the installation can be easily done with the manufacturer’s unique Sure360 Safety Installation System as well as the LockStrong bar and Tether360. This combination also increases the possibility for parents to install and use the Evenflo Revolve 360 properly, resulting in safety enhancement.
Due to the heavy-duty carrier and base, the Revolve 360 may not be the best option for families who frequently need to move the car seat in and out of their vehicle. If portability is a top priority, you may want to consider a more lightweight car seat or some car seats that are foldable.
Two Cup Holders
The Evenflo Revolve 360 car seat comes equipped with two built-in cup holders, which can be convenient for parents and children alike. The cup holders are located on both sides of the car seat, making it easy for children to reach for their drinks and snacks during a long car ride. With a large and deep design, the cup holders are friendly to hold most types of water bottles.
They are also removable, which makes them easy for parents to clean and maintain. If they become dirty or sticky, you can simply remove them from the car seat and wash them in the sink or dishwasher.
However, it is important to note that the cup holders do add a little bit of width to the car seat, which could make it more difficult to fit three across in the back seat of some vehicles. But this is not a biggie if you have one or two kids in a car seat.
6. Crash Tests and Safety Ratings
Is it safe to use Evenflo Revolve 360?
Yes, this meets all applicable federal safety standards and has been tested for crash performance.
A little unknown secret about the car seat industry is that all car seats sold in the United States are required to meet federal safety standards, and the Evenflo Revolve 360 is no exception. Even better, in the car seat manual, the manufacturer says that the Revolve360 also meets the Canadian Motor Vehicle Safety Stands 213 (213.1 and 213.2).
The car seat has side-impact protection, which is designed to help keep your child safe in the event of a collision. Usually, the more layers of side impact protection a car seat has, the better! The manufacturer doesn’t make it clear how many layers the Revolve 360 has.
There should be at least two layers. In addition, the car seat is equipped with an adjustable headrest, which helps to protect your child’s head and neck in case of a crash.
If you’re worrying about its rotation feature being a potential cause of any less protection, don’t have to be. The Evenflo Revolve 360 is a safe car seat that has been tested and meets the safety standards in both US and Canada.
Another thing that is more important than the crash tests and safety rating is that you are installing and using the car seat PROPERLY. As long as you follow the instructions and steps in the Evenflo Revolve 360 manual, it would provide parents with peace of mind knowing that their child is protected while they are on the road.
What I don’t mention above is the well-padded cushion, which is made of energy-absorbing foam, along the steel-reinforced frame; they perform excellently to provide extra protection in a crash.
7. Performance
Weight and Height Limits
The Evenflo Revolve 360 car seat has a weight limit of 5 to 40 pounds and a height limit of up to 49 inches for rear-facing harness mode. That’s very common among all-in-one and convertible car seats.
But the manufacturer listened to the customer’s voice and recently launched two upgraded models with 50 lbs rear-facing weight limit – Evenflo Gold Revolve360 Extend with SensorSafe and Evenflo Gold Revolve360 Extend with Quick Clean Cover. Both are good car seats with a 50 lbs rear-facing weight limit. (The rear-facing height limit for both extended versions is 48 inches.)
After switching the Evenflo Revolve 360 to a forward-facing harness, its average performance in the height and weight limit: was 65 lbs/ 49″. The good point is that you can more effortlessly get the kid in and out of the car seat as well.
We’re a big fan of high booster weight limits, and the Revolve 360 follows suit. It has a 120-pound capacity in booster mode, making it a good option for big kids to stay in this car seat until they don’t need it anymore. See also the best car seats with a 5-point harness up to 120 pounds.
However, the height limit of 57 inches is relatively low (even most car seats are at this level), which means that taller children may outgrow the car seat before they reach the weight limit.
It’s important to note that car seats are designed to be used for a limited period of time, and you should always follow the Evenflo Revolve 360 manual regarding the maximum weight and height limits for every stage.
Stage / Modes
With the word ‘all-in-one’ in its name, the Evenflo Revolve 360 can’t be anything but, can it?
Well, true to its name, it supports three stages: rear-facing harness, forward-facing harness, and booster. And to the NHTSA’s definition of car seat stages, it should be the last car seat you’ll need to ride your little one from birth to the day they don’t need a child restraint system for protection. (But still need to use the vehicle seat belt then.)
It’s a pity that the Evenflo Gold Revolve360 does not allow for a no-back booster. It’s understandable because the car seat carrier must be installed and used with the base. They’re ONE!
Age Range
What age is Evenflo 360 car seat for?
The Evenflo Revolve 360 car seat is designed to be used from birth up to when your child reaches the maximum weight and height limit for the car seat, as long as the car seat is still good in its expiration date.
The top height and weight limits are 120 lbs/57″. It’s good to keep your little one to 8-9 years of age, meeting or exceeding the federal requirements on a booster seat or booster mode. This makes Revolve 360 a good car seat for 7 year olds.
It’s important to always follow the manufacturer’s instructions for installation and use and to make sure that the car seat is appropriate for your child’s age, weight, and height.
Airplane
Can you take Evenflo Gold Revolve360 on a plane?
I’m afraid not. The Evenflo Revolve 360 car seat is NOT FAA-approved for use on airplanes.
You can find this statement in the manual. (It is stored on the back of the car seat.) It is only approved for use in motor vehicles, and it should always be installed according to the manufacturer’s instructions in the rear-facing or forward-facing position, depending on your child’s weight and height.
If you need a car seat for air travel, you may want to consider purchasing another car seat that is specifically approved for use on airplanes. Look for a car seat that is lightweight, easy to install, and meets the requirements of the Federal Aviation Administration (FAA). See also portable car seats and foldable car seats for easy carrying and storage.
The FAA recommends that children under the age of 2 be secured in a car seat on an airplane, and some airlines require that all children under a certain age or size use a car seat during the flight. Be sure to check with your airline before you travel to find out their specific policies and requirements regarding car seats.
Lifespan
How long is Graco Turn2Me good for
The Evenflo Revolve 360 car seat has a recommended lifespan of around 10 years from the date of manufacture.
This is a general guideline that applies to most car seats, as over time the materials and components used in the car seat can deteriorate or become less effective. Even if a car seat looks like it’s in good condition, it may not provide the same level of protection in the event of a crash if it’s been used for a long time.
It’s important to check the expiration date of your car seat and replace it if it has expired, or if it has been involved in a moderate to severe crash.
In addition, if the car seat shows signs of wear and tear or damage, it should be replaced immediately, as it may not provide adequate protection for your child. Be sure to follow the manufacturer’s instructions for caring for and maintaining your car seat, as this can help extend its lifespan and ensure that it performs as intended.
See also:
8. Evenflo Revolve 360Installation
Installing the Evenflo Revolve 360 car seat can be a straightforward process with the right tools and techniques. Here are the steps to follow to install the car seat:
Choose the right installation method: The Evenflo Revolve 360 can be installed using either the vehicle’s seat belt or the LATCH system. Choose the installation method that is best for your vehicle and your comfort level.
Adjust the car seat: Before installation, adjust the car seat to the correct height and position for your child. Make sure the harness is at the correct height and that the recline angle of the seat is appropriate for your child’s age and weight.
Install the base: If you’re using the LATCH system, attach the base of the car seat to the lower anchors in your vehicle. If you’re using the vehicle’s seat belt, thread the seat belt through the base and buckle it in place. Make sure the base is securely fastened and that it doesn’t move more than 1 inch from side to side or front to back.
Attach the car seat: Attach the car seat to the base by clicking it into place. Make sure it’s securely attached and that you hear an audible click.
Adjust the harness: Adjust the harness to fit your child snugly. Make sure the harness is at or just below your child’s shoulders when rear-facing and at or just above your child’s shoulders when forward-facing.
Check for a tight installation: Push down on the car seat to make sure it’s securely installed. If you’re using the LATCH system, make sure the base doesn’t move more than 1 inch from side to side or front to back. If you’re using the vehicle’s seat belt, make sure the belt is tightened so that there’s no slack.
Final checks: Finally, check the recline angle of the car seat and make sure it’s appropriate for your child’s age and weight. Make sure the harness is adjusted correctly and that your child is seated comfortably.
In conclusion, installing the Evenflo Revolve 360 car seat can be a straightforward process with the right tools and techniques. By following the steps outlined above, you can ensure that the car seat is installed correctly and that your child is seated safely and comfortably. If you have any questions or concerns about the installation process, I recommend checking the manufacturer’s website or contacting the manufacturer directly.
Install Evenflo Gold Revolve360 Rear-Facing
Install Using LATCH Connectors
1. Store Tether Strap. Attach the tether hook to the slot on the back or side of the car seat and remove the slack.
2. Rotate The Car Seat Into The Rear-Facing Position. At the same time, slide the blue trigger and squeeze the gray lever. Then rotate the seat in either direction into the rear-facing position. The seat is correctly in the rear-facing position when the arrow points to the blue label.
The seat is securely locked in position when you hear a “CLICK!” Grab the sides of the seat and try to rotate the seat without using the turn lever to make sure it is securely locked in place.
3. Remove Lower Anchor Attachment from Storage Location. Open the lower anchor storage door on the base of the car seat and remove the lower anchor attachment from the storage compartment. Close the storage compartment door.
4. Extend the Lower Anchor Strap. For easier installation, extend the lower anchor strap to its maximum length by pressing the grey button and pulling on the strap.
5. Lay the Lower Anchor Attachment Connectors in the Seat. The strap may not be long enough for both connectors to reach the seat. Simply lay the loose end of the strap on the seat, as shown.
6. Recline the Car Seat. From the rear of the seat, pull the recline handle and place the car seat in any of the 4 recline positions.
7. Place Car Seat Rear-Facing in Back Seat of the Vehicle. Place it rear-facing in the vehicle seat and center the car seat between the lower anchors. The base should sit as flat as possible on the vehicle seat. Slide the seat until it touches the vehicle seat back.
8. Make Sure Base is a minimum of 80% on Vehicle Seat.
9. Check the Level Indicator. Vehicle MUST be on level ground. Check the level indicator on the car seat. The bubble must be completely within the blue zone. Adjust the recline until the bubble is completely within the blue zone. If needed, rolled towels may be placed under the car seat at the vehicle seat crease, until the ball is completely in the blue zone.
10. Remove the Infant Body Support. Remove the infant body support if it is installed in the seat. You may reinstall the body support once the car seat is fully secured.
11. Open The Door To Expose The Rear-Facing Belt Path. Press the button on the front of the car seat and lift up to open the door and expose the rear-facing belt path.
12. Open the SnugLock® Lock-Off. Pull the grey lever to open the SnugLock® lock-off.
13. Route the Lower Anchor Strap. Thread the lower anchor strap through the blue rear-facing belt path, under the SnugLock® lockoff and out the other side. The strap should lie as flat as possible and not be twisted.
14. Attach Lower Anchor Connectors to Vehicle’s Lower Anchors. Make sure the arrows are pointing up. Lower anchor strap should not be twisted. If twisted, you will not be able to tighten the strap. Lower anchor attachment can only be used if the vehicle lower anchor spacing is 11” (28 cm) from the center of one lower anchor to the center of the other lower anchor.
15. Tighten the Lower Anchor Strap. Press down firmly in the center of the car seat while tightening the lower anchor strap. You may need to tighten through the belt path as shown. Do not pull on the belt with excessive force. If the belt is too tight, you will not be able to close the SnugLock® Lock-Off.
16. Close the SnugLock® Lock-Off. When the slack is removed, close the SnugLock® Lock-Off until you hear a “CLICK!”. Make sure the Lower Anchor strap is under the SnugLock® Lock-Off.
17. Close the Door. Lower the door back down. The door is secure when you hear a “CLICK!”.
18. Test For Tightness. Grab the sides of the seat where the lower anchor strap is and slide the car seat side-to-side and front-to-back. If the seat moves less than 1” (2.5 cm), it is tight enough.
19. Check the Level Indicator. Vehicle MUST be on level ground. Check the level indicator on the car seat. The bubble must be completely within the blue zone. Readjust if needed. Secure the child with the 5-point harness following the guidelines in the manual. Recheck the level indicator with child in seat.
Install Using Vechile Seat Belt
1. Store Tether and Lower Anchor Connectors in Storage Locations. Attach the tether hook to the slot on the back or side of the car seat and remove the slack. Store the lower anchor connectors in the storage compartment in the seat base.
2. Rotate The Car Seat Into The Rear-Facing Position. At the same time, slide the blue trigger and squeeze the gray lever. Then rotate the seat in either direction into the rear-facing position. The seat is correctly in the rear-facing position when the arrow points to the blue label.
The seat is securely locked in position when you hear a “CLICK!” Grab the sides of the seat and try to rotate the seat without using the turn lever to make sure it is securely locked in place.
3. Recline the Car Seat. From the rear of the seat, pull the recline handle and place the car seat in any of the 4 recline positions.
4. Place Car Seat Rear-Facing in Back Seat of the Vehicle. Place it rear-facing in the desired vehicle seat. The base should sit as flat as possible on the vehicle seat. Slide the seat until it touches the vehicle seat back.
5. Make Sure Base is a minimum of 80% on Vehicle Seat
6. Check the Level Indicator. Vehicle MUST be on level ground. Check the level indicator on the car seat. The bubble must be completely within the blue zone. Adjust the recline until the bubble is completely within the blue zone. If needed, rolled towels may be placed under the car seat at the vehicle seat crease, until the ball is completely in the blue zone.
7. Remove the Infant Body Support. Remove the infant body support if it is installed in the seat. You may reinstall the body support once the car seat is fully secured.
8. Open The Door To Expose The Rear-Facing Belt Path. Press the button on the front of the car seat and lift up to open the door and expose the rear-facing belt path.
9. Open the SnugLock® Lock-Off. Pull the grey lever to open the SnugLock® lock-off.
10. Route the Vehicle Seat Belt. Thread vehicle seat belt through the blue rearfacing belt path, under the SnugLock® lock-off and out the other side. Buckle the seat belt. The seat belt should lie as flat as possible and not be twisted.
11. Tighten the Vehicle Seat Belt. Press down firmly in the center of the car seat. Pull on the shoulder belt to tighten while feeding the slack back in the retractor. DO NOT pull on the belt with excessive force. If the belt is too tight, you will not be able to close the SnugLock® Lock-Off.
12. Close the SnugLock® Lock-Off. When the slack is removed, close the SnugLock® Lock-Off until you hear a “CLICK!”. Make sure the vehicle seat belt is under the SnugLock® Lock-Off.
Note: When using the lock-off, you do not need to switch the retractor to lock the vehicle seat belt. The lock-off locks the seat belt. It is recommended to switch the retractor after the installation is complete to avoid a possible strangulation risk.
13. Close the door. Lower the door back down. The door is secure when you hear a “CLICK!”. CLICK!
14. Test For Tightness. Grab the sides of the seat where the vehicle seat belt is and slide the car seat side-to-side and front-to-back. If the seat moves less than 1” (2.5 cm), it is tight enough.
15. Check the Level Indicator. Vehicle MUST be on level ground. Check the level indicator on the car seat. The bubble must be completely within the blue zone. Readjust if needed. Secure the child with the 5-point harness following the guidelines in the manual. Recheck the level indicator with child in seat.
Install Evenflo Revolve 360 Forward-Facing
Forward-facing Installation with LATCH
1. Unhook Tether Strap From Storage. Unhook the tether and lay it on the seat.
2. Rotate The Car Seat Into The Forward-Facing B Position. At the same time, slide the blue trigger and squeeze the gray lever. Then rotate the seat in either direction into the forward-facing position.
The seat is correctly in the forward-facing position when the arrow points to the orange and green label. The seat is secure when it “clicks” into place.
3. Remove Lower Anchor Attachment from Storage Location. Open the lower anchor storage door on the base of the car seat and remove the lower anchor attachment from the storage compartment. Close the storage compartment door.
4. Extend the Lower Anchor Strap. For easier installation, extend the lower anchor strap to its maximum length by pressing the grey button and pull out on the strap.
5. Route the Lower Anchor Strap. Thread the lower anchor strap through the orange forward-facing belt path and out the other side. The strap should lie as flat as possible and not be twisted.
6. Recline the Car Seat. Place the car seat in any of the 4 recline positions. For children under 25 lb (11.3 kg), you MUST use recline positions 2 or 3.
7. Place Car Seat Forward-Facing in Back Seat of the Vehicle. Place it forward-facing in the vehicle seat and center the car seat between the lower anchors. The base should sit as flat as possible on the vehicle seat. Slide the seat until it touches the vehicle seat back.
8. Make Sure Base is a minimum of 80% on Vehicle Seat.
9. Check the Level Indicator. Vehicle MUST be on level ground. Check the level indicator on the car seat. The bubble must be completely within the orange zone.
Adjust the recline until the bubble is completely within the orange zone. If needed, rolled towels may be placed under the car seat at the vehicle seat crease, until the ball is completely in the orange zone.
10. Expose the Lock-Off.
- A. Loosen the harness straps.
- B. Raise the headrest to the highest position.
- C. Unbuckle the chest clip.
- D. Unbuckle the buckle.
- E. Lift the headrest pad flap up out of the way.
- F. Undo the 2 lower snaps.
11. Open the SnugLock® Lock-Off. Pull the gray lever to open the SnugLock® lockoff.
12. Route the Lower Anchor Strap. Under the SnugLock® Lock-Off The lower anchor strap should lie as flat as possible and not be twisted.
13. Connect the Lower Anchor Connectors to Vehicle’s Lower Anchors. The lower anchor strap should not be twisted. If twisted, you will not be able to tighten the strap.
14. Tighten the Lower Anchor Strap. Press down firmly in the center of the car seat while tightening the lower anchor strap. You may need to tighten through the belt path as shown. Do not pull on the belt with excessive force. If the belt is too tight, you will not be able to close the SnugLock® Lock-Off.
15. Close the SnugLock® Lock-Off. When the slack is removed, close the SnugLock® Lock-Off until you hear a “CLICK!”. Make sure the Lower Anchor strap is under the SnugLock® Lock-Off.
16. Attach Tether Strap. Extend the tether by lifting up the tether adjuster and attach. Consult vehicle owner’s manual for a specific location.
17. Tighten Tether Strap. Remove all the slack.
18. Test For Tightness. Grab the sides of the seat where the lower anchor strap is and slide the car seat side-to-side and front-to-back. If the seat moves less than 1” (2.5 cm), it is tight enough. Secure your child with the 5-point harness.
19. Replace the Seat Pad. Move the headrest back to its proper position for your child.
Forward-Facing Installation Using Vehicle Seat Belt
1. Store Lower Anchor Connectors in Storage Location. Store the lower anchor connectors in the storage compartment in the seat base.
2. Unhook Tether Strap From Storage. Unhook tether and lay it in the seat.
3. Rotate the car seat into the forward-facing position. At the same time, slide the blue trigger and squeeze the gray lever. Then rotate the seat in either direction into the forward-facing position.
The seat is correctly in the forward-facing position when the arrow points to the orange and green label. The seat is secure when it “clicks” into place.
4. Recline the Car Seat. Place the car seat in any of the 4 recline positions. For children under 25 lb (11.3 kg), you MUST use recline positions 2 or 3.
5. Place Car Seat Forward-Facing in Back Seat of the Vehicle. Place it forward-facing in the vehicle seat. The base should sit as flat as possible on the vehicle seat. Slide the seat until it touches the vehicle seat back.
6. Make Sure Base is a minimum of 80% on Vehicle Seat.
7. Check the Level Indicator. Vehicle MUST be on level ground. Check the level indicator on the car seat. The bubble must be completely within the orange zone.
Adjust the recline until the bubble is completely within the orange zone. If needed, rolled towels may be placed under the car seat at the vehicle seat crease, until the ball is completely in the orange zone.
8. Expose the Lock-Off.
- A. Loosen the harness straps.
- B. Raise the headrest to the highest position.
- C. Unbuckle the chest clip.
- D. Unbuckle the buckle.
- E. Lift the headrest pad flap up out of the way.
- F. Undo the 2 lower snaps.
9. Open the SnugLock® Lock-Off. Pull the gray lever to open the SnugLock® lockoff.
10. Route the Vehicle Seat Belt C. Thread the vehicle seat belt through the orange forward-facing belt path, through the lock-off, and out the other side. Buckle the seat belt. The seat belt should lie as flat as possible and not be twisted. Review your vehicle owner’s manual for vehicle seat belt use.
11. Tighten the Vehicle Seat Belt. Press down firmly in the center of the car seat. Pull on the shoulder belt to tighten while feeding the slack back in the retractor. DO NOT pull on the belt with excessive force. If the belt is too tight, you will not be able to close the SnugLock® Lock-Off.
12. Close the SnugLock® Lock-Off. When the slack is removed, close the SnugLock® Lock-Off until you hear a “CLICK!”. Make sure the vehicle seat belt is under the SnugLock® Lock-Off. Note: When using the lock-off, you do not need to switch the retractor to lock the vehicle seat belt.
The lock-off locks the seat belt. It is recommended to switch the retractor after the installation is complete to avoid a possible strangulation risk.
13. Attach Tether Strap. Extend the tether by lifting up on the tether adjuster and attach. Consult vehicle owner’s manual for specific location.
14. Tighten Tether Strap. Remove all the slack.
15. Test For Tightness. Grab the sides of the seat where the lower anchor strap is and slide the car seat side-to-side and front-to-back. If the seat moves less than 1” (2.5 cm), it is tight enough. Secure your child with the 5-point harness.
16. Replace the Seat Pad. Move the headrest back to its proper position for your child.
Install Evenflo Revolve 360 in Booster Mode
1. Store The Harness System
- A. Loosen the shoulder straps as much as possible.
- B. Raise the headrest to the highest position.
- C. Unbuckle the chest clip and the buckle strap D.
2. Remove the Buckle Strap. Press the button on the front of the car seat and lift up to open the door. Locate the metal retainer on the underside of the door.
3. Rotate Metal Retainer and Insert It Up. Through the Shell and Pad From the top of the car seat, pull the buckle out. Lower the door back down. The door is secure when you hear a “CLICK!”.
4. Lift The Headrest Pad Flap Up Out Of The Way
5. Unsnap Bottom Seat Pad Undo the 2 lower snaps.
6. Open the Harness Storage Door
7. Place Harness, Chest Clip, Buckle, Buckle Tongues, and Buckle Strap Inside Storage Compartment, then Close the Door
8. Replace Seat Pad Move the headrest back to its proper position for your child.
9. Rotate The Car Seat Into The Forward-Facing/ Booster Position. At the same time, slide the blue trigger and squeeze the gray lever. Then slide the seat in either direction into the forward-facing/booster position.
The seat is correctly in the forward-facing/booster position when the arrow points to the orange and green label. The seat is secure when it “clicks” into place.
10. Recline the Car Seat. Car seat MUST be in recline position 1 for booster mode use.
11. Place the Booster Seat Forward-Facing in the Back Seat of Vehicle. Place forward-facing on a vehicle seat that has a lap/shoulder seat belt. The base should sit as flat as possible on the vehicle seat. Slide the seat until it touches the vehicle seat back.
*****Skip to Step 25 if Not Using LATCH****
12. Unhook Tether Strap From Storage. Unhook tether and lay it in the seat.
13. Remove Lower Anchor Connectors from Storage Location. Open the lower anchor storage door on the base of the car seat and remove the lower anchor connectors from the storage compartment. Close the storage compartment door.
14. Extend the Lower Anchor Strap. For easier installation, extend the lower anchor strap to its maximum length by pressing the grey button and pull out on the strap.
15. Route the Lower Anchor Strap. Thread the lower anchor strap through the orange forward-facing belt path and out the other side. The strap should lie as flat as possible and not be twisted.
16. Expose the SnugLock® Lock-Off
- A. Raise the headrest to the highest position.
- B. Lift the headrest pad flap up out of the way.
- C. Undo the 2 lower snaps.
17. Open the SnugLock® Lock-Off. Pull the lever to open the SnugLock® lock-off.
18. Make Sure the Lower Anchor Strap is Routed Under the SnugLock® Lock-Off. The lower anchor strap should lie as flat as possible and not be twisted.
19. Connect the Lower Anchor Connectors to Vehicle’s Lower Anchors. Lower anchor strap should not be twisted. If twisted, you will not be able to tighten the strap.
20. Tighten the Lower Anchor Strap. Press down firmly in the center of the car seat while tightening the lower anchor strap. You may need to tighten through the belt path as shown.
Do not pull on the belt with excessive force. If the belt is too tight, you will not be able to close the SnugLock® Lock-Off.
21. Close the SnugLock® Lock-Off. When the slack is removed, close the SnugLock® Lock-Off until you hear a “CLICK!”. Make sure the Lower Anchor strap is under the SnugLock® Lock-Off.
22. Attach Tether Strap. Extend the tether by lifting up on the tether lock and attach. Consult vehicle owner’s manual for specific location.
23. Tighten Tether Strap. Remove all the slack.
24. Replace the Seat Pad. Move the headrest back to its proper position for your child.
******Booster Installation with Vehicle Seat Belt*****
25. Thread the Vehicle Seat Shoulder Belt Through Seat Belt Guide on the Headrest. Secure your child with the lap-shoulder seat belt system.
9. Comfort
Headrest and Harness - 14 Positions
The Evenflo Revolve 360 car seat has a 14-position adjustable headrest, which can be adjusted with one hand. To adjust the headrest and harness height, simply pull the lever located at the top of the car seat, and then move the headrest up or down to the desired position.
The harness straps will automatically adjust to the correct height as you adjust the headrest. (A really LOVELY feature!)
The 14 headrest positions are very outstanding among the all-in-one car seats – only Birtax One4Life’s 15 positions outperform that. That allows for a custom fit as your child grows, ensuring that the harness is always positioned correctly and that the car seat provides the maximum amount of protection and comfort.
Reclines - 4 Positions
The Evenflo Revolve 360 car seat has four recline positions. To adjust the recline, you need to use the recline handle, which is located at the bottom of the car seat. Here’s how to adjust the recline:
- Lift up the fabric flap at the bottom of the car seat to reveal the recline handle.
- Press the recline handle and slide the car seat forward or backward to the desired recline position.
- Release the handle and ensure that the car seat is securely locked in place.
The four recline positions are designed to provide the best fit for your little one, depending on their age and size. The car seat is designed to be used in the fully upright position for older children, but younger children may need a more reclined position to ensure that their head and neck are properly supported.
Head Pillow and Body Pillow
The Evenflo Revolve 360 comes equipped with a body pillow and a head pillow, which are used to provide extra support and comfort for smaller infants.
They are designed to help babies fit snugly in the car seat and include additional padding and a head support pillow to keep your newborn’s head and body in the correct position.
That’s because newborns may not fit well in a car seat at their own size and the body pillow helps to raise them up to make sure the harness straps are at or below the child’s shoulders.
Both are used for rear-facing only and can be removable when your kid grows and no longer needs the extra support. The Evenflo does not specify the weight limit to remove the body pillow or head pillow in the car seat manual because babies are at different growth paces and sizes.
It’s important to refer to the manufacturer’s instructions to ensure that you are using the infant insert correctly and that it is properly installed in the car seat.
Padding
Another area where the Revolve 360 impresses is in the padding and cushion. It’s clearly improved from its cheaper models like the Evenflo Chase and Sonus 65, even though it’s still the cheapest one of the rotating car seats.
With the addition of decent padding, Evenflo has successfully closed the gap on the comfy level between its high-end models to other more expensive car seats.
On the one hand, brands opt for thick padding to benefit from the comfortable ride experience that they provide, and on the other, well-padded car seats are good for reducing crash energy, and providing extra protection. With the Gold Revolve 360, Evenflo has equipped it with the best of both worlds.
When looking at the rotatable car seats that I recommend as alternatives, they all have plenty of padding.
Materials
The Evenflo Revolve 360 car seat features a combination of materials designed for comfort and durability. The seat pad and headrest are made from a soft and breathable knit fabric that is easy to clean.
10. Care and Maintenance
When it comes to cleaning, the car seat pad and headrest cover are both machine washable, making it easy to keep the car seat clean and fresh. You can remove the pad and cover from the car seat, and wash them in your washing machine using cold water and mild detergent.
It’s important to follow the manufacturer’s instructions in the car seat manual for cleaning to ensure that you don’t damage the materials or compromise the safety of the car seat.
Additionally, the plastic and metal components of the car seat can be wiped down with a damp cloth and mild soap, and the harness straps can be spot cleaned with a damp cloth as well.
11. Specifications
Brand | |
Brand | Evenflo |
Type | |
Suitable for | Newborns, toddlers, and preschoolers |
Positions | Rear-facing and forward-facing |
Design | |
Portability (1-10) | 7. Bulky and heavy duty |
Weight (lb.) | 29.6 |
Weight limit (lb.) | 4-40 (RF); 22-65 (FF); 40-120 (Booster) |
Height limit (inch) | 40″ (RF); 49” (FF); 57″ (Booster) |
Dimension | 19.8 x 25.9 x 21.0 in DWH |
Cup holder | Two |
Performance | |
Age Range | Birth-8 years or older |
Stage | 1st, 2nd, 3rd |
Installation | LATCH and seat belt |
Headrest Positions | 14 |
Recline Positions | 4 |
Airplane | Yes |
Lifespan | 10 Years |
Extra Features | 360-degree rotation for easy access to the kid |
12. Warranty
Oh, my! Evenflo provides a lifetime warranty for the Gold series, including the Revolve 360.
By simply registering your Evenflo Gold Car Seat online within 3 months of purchase, you will have access to the following Gold Lifetime Warranty benefits:
Lifetime Warranty – Through the expiration date of your Gold Car Seat, Evenflo warrants this Gold product to the Registrant against material irregularities.
Replacement Parts – Evenflo will send out free replacement parts based on Gold Lifetime Warranty and subject to the exclusions listed below.
Premier Consumer Resource Center located in the USA–for product support, installation, and assembly advice.
The lifetime warranty is applicable in the United States and Canada Only.
13. Manual
The user manual is the most important thing you need to make sure it’s included in the package. You should always read the user manual before starting to install and use it for riding your child.
The Evenflo Revolve 360 manual is stored in a small storage slot on the back of the seat, but you can always find the online user manual on its official website, or download the PDF here.
14. Evenflo Revolve 360 vs Graco Turn2Me
Evenflo Gold Revolve360 is probably the best alternative for Graco Turn2Me. It’s $50 cheaper and has a higher booster weight limit. Check the key specs comparison between these two rotatable 3 in 1 car seats.
Car Seats Comparison | Graco Turn2Me | Evenflo Gold Revolve360 |
---|---|---|
Price | $449.99 | $399.99 |
Rotation | 90 Degrees | 360 Degrees |
Weight limit (lb) | RF:4-40 / FF: 22-65 / Booster:40-100 | RF:4-40 / FF: 22-65 / Booster:40-120 |
Height limit (in) | RF:49"* / FF: 49" / Booster:57" | RF:40" / FF: 49" / Booster:57" |
Headrest Adjustable Positions | 10 | 10 |
Reclines | 4 | 6 |
Steel Reinforced | ✓ | ✓ |
Cup Holder | Two | Two |
Stages | Three | Three |
Type | All-in-one | All-in-one |
Belt Lock-Off | ✓ | - |
*About the 49″ height limit for rear-facing: The top of the head must be 1” (2.5 cm) below the headrest adjustment lever.
15. FAQs on Evenflo Revolve 360
How long does Evenflo Revolve 360 last?
As an all-in-one car seat, the Evenflo Revolve 360 offers a long usable time of up to 10 years from the date of manufacture.
That matches its size and modes. It is able to accommodate kids between 4-120 pounds and can be used in three modes.
The expiration date can be found in the manual and on a white label on the side of the car seat.
Is the Evenflo 360 FAA approved?
I’m afraid not. It passes the Federal Motor Vehicle Safety Standard 213 (FMVSS 213) and Canadian Motor Vehicle Safety Standard 213 (CMVSS 213.1 and 213.3) and is approved for use in a motor vehicle on the road.
But it’s not approved for airplane use on a plane. It’s easy to imagine this because of its rotating feature. There is not as much space on the plane as in a car.
And you won’t want to carry it through the airport. It’s heavy, weighing up to 29.6 pounds, making it a challenge for parents to take it from home to the plane. It has two parts, not as easy to store as those folding car seats.
If you need a car seat for air travel, find some that are lightweight and portable. If you’re planing to take an infant along with you for travel, this car seat with wheels is a good option.
Does the Evenflo 360 turn into a booster?
Yes, the Evenflo Gold Revolve360 is a 3 in 1 car seat and can be turned to a booster after your little one outgrows the height or weight limits for forward-facing harness – 65 pounds or 49 inches.
Typically, this happens around your kids at five or six years, even though the minimum weight and age requirements for using the Evenflo 360 in a booster is 40 pounds and 4 years of age. According to child safety experts’ suggestions, it’s better to keep the kid in a 5-point harness for as long as possible.
Does the Evenflo 360 rotate forward-facing?
Of course. The Evenflo Revolve 360 supports 360 degrees of rotation and can be rotated toward rear-facing and forward-facing.
After the kid outgrows the rear-facing height (49 inches with the head must be one inch below the headrest button) or weight limit (40 pounds) When rotating forward-facing, it can be used in two modes – forward-facing harness and booster.
Can you use the Evenflo 360 without base?
No. The base is necessary to install and use the Evenlfo Revolve 360.
This rotating car seat has two parts, a base, and a car seat shell. These two parts can’t be separated for use.
This is very different from the relationship between an infant car seat and the base. Most infant car seats can be installed and used separately without the base (Not for three models of Nuna Pipa car seats).
How to adjust straps on Evenflo Revolve 360?
The Evenflo Gold Revolve360 all-in-one car seat has a no-rethread harness system, which means you do not need to manually re-thread the straps to adjust the harness height. Instead, you can simply adjust the headrest to the desired height and the harness will automatically adjust to fit your child.
Here are the steps to adjust the straps on the Evenflo Revolve 360 car seat:
- Loosen the harness straps: To adjust the straps, first, loosen them by pressing the release button at the front of the car seat and pulling on the straps.
- Adjust the headrest: Adjust the headrest to the desired height by pulling up or pushing down on the headrest adjustment handle at the top of the car seat.
- Re-thread the straps: To re-thread the straps, slide the straps through the slots on the back of the car seat and the slots on the sides of the headrest. Make sure the straps are in the correct slots for your child’s height and weight.
- Tighten the straps: Once the straps are in the correct slots, pull on the tail end of the straps to tighten them. The straps should be snug, but not too tight that they are uncomfortable for your child.
- Check for proper fit: After adjusting the straps, make sure they are properly positioned on your child’s shoulders and not twisted. Also, make sure that the chest clip is positioned at armpit level.